Setting
€ £ $

1-3/4" 48-Spline NASCAR Sway Bars and Arms

1-3/4" 48-Spline NASCAR Sway Bars and Arms

These heavy duty Torque Tough bars are made of special high-grade spring steel.

RECOMMENDED APPLICATIONS

NASCAR®, Late Model, SWT; Elite Division

 

1-3/4" 48-SPLINE HOLLOW SWAY BAR

FEATURES

  • 1-3/4" OD 48-spline ends, all 37-1/2" long
  • 21 outside diameter sizes available
  • All gundrilled and honed to .750 ID
  • Timed, heat-treated and Zinc coated
1-3/4 48-Spline NASCAR Sway Bars

NOTES

Click here for our sway bar rate table.

PART # BAR DIAMETER 12" 12.5" 13" 13.5" 14" 14.5" 15" 15.5" 16"
608-175-118 1.18" 368 354 340 328 316 305 295 286 277
608-175-125 1.25" 465 446 429 413 399 385 372 360 349
608-175-131 1.31" 573 550 529 509 491 474 459 444 430
608-175-137 1.37" 697 669 643 619 597 577 558 540 523
608-175-143 1.43" 833 499 769 740 714 689 667 645 625
608-175-150 1.50" 985 946 910 876 845 816 789 764 740
608-175-156 1.56" 1150 1105 1062 1023 987 953 921 891 864
608-175-162 1.62" 1333 1250 1231 1185 1143 1104 1067 1033 1001
608-175-168 1.68" 1526 1465 1409 1357 1309 1264 1222 1183 1146
608-175-175 1.75" 1736 1667 1603 1544 1489 1438 1390 1346 1304
608-175-181 1.81" 1956 1878 1806 1739 1678 1620 1566 1516 1468
608-175-187 1.87" 2191 2104 2023 1948 1879 1614 1754 1698 1645
608-175-193 1.93" 2432 2336 2246 2163 2086 1814 1948 1885 1826
608-175-200 2.00" 2687 2580 2481 2390 2305 2225 2151 2082 2017
608-175-206 2.06" 2945 2828 2720 2619 2526 2439 2358 2282 2211
608-175-212 2.12" 3214 3086 2968 2858 2756 2662 2573 2490 2413
608-175-218 2.18" 3483 3344 3216 3097 2987 2884 2788 2699 2615
608-175-225 2.25" 3758 3609 3471 3342 3223 3113 3009 2912 2822
608-175-231 2.31" 4031 3871 3722 3585 3457 3339 3228 3124 3026
608-175-237 2.37" 4308 4136 3978 3831 3695 3568 3449 3338 3234
608-175-243 2.43" 4579 4396 4228 4072 3927 3792 3666 3548 3437

1-3/4" 48-SPLINE SWAY BAR ARMS

FEATURES

  • All made from 4130 steel
  • Straight armss — You bend to fit your car then heat treats — sold individually
  • Pre-bent and heat-treated arms — 3-1/4" Offset fits most Late Model chassis
  • Arm Size: 16-1/4" long (center of hole to end of arm) and 3/4" thick
1-3/4 48-Spline NASCAR Sway Arms
PART # DESCRIPTION
613-5 Straight Arm, Not Heat-Tread (each)
613-5-1 Pre-Bent, Heat-Treated — 1 pair
613-5-1L Pre-Bent, Heat-Treated — Left side only
613-5-1R Pre-Bent, Heat-Treated — Right side only