Setting
€ £ $

Front and Rear Standard Sway Bars

Front and Rear Standard Sway Bars

Our Torque Tough™ Sway Bars are made from special high-grade spring steel that maintains a more consistent spring rate and greater durability. The easiest way to tune your chassis to any track condition! Available with a variety of arm lengths and shapes, these bars are perfect in the NASCAR stock car arena, street rods and off-road vehicles.

RECOMMENDED APPLICATIONS

NASCAR • ARCA • Circle Track • Road Racing • Off Road • Street Use

SOLID BARS

  • Available in 1" or 1-1/4" OD 48-spline ends
  • Available in 12 stock lengths -custom lengths are special order
  • Rear bars also available in 5/8", 3/4", and 7/8"
  • Timed for perfect arm alignment for bar interchange
  • Double heat-treated and Zinc coated

HOLLOW BARS

  • Standard 48-spline ends in 1-1/4" and 1" OD
  • Available in 4 wall thickness: .095, .120, .188, .250
  • Timed for perfect arm alignment for bar interchange

NOTES

To order, add the length of the sway bar you need to the part number listed below. Example: for a 1-1/4" solid x 36-1/2" bar, the part number would be 602-125-365.

For proper length take the width of frame rails where bar will be used and add 3". This will be enough room for arms and shaft collars.

Stock Lengths: 32", 33", 34", 35", 36", 36-1/2", 37-1/2", 38-1/2", 39", 40-1/2", 42" and 43" (custom lengths are special order)

Click here for our sway bar rate table.

STANDARD SWAY BARS
PART # BAR SPLINE DESCRIPTION
602-100-LENGTH Solid 48 1" OD
602-125-LENGTH Solid 48 1-1/4" OD
608-100-095 Tubular 48 1" OD x .095 Wall, Specify Length
608-100-120 Tubular 48 1" OD x .120 Wall, Specify Length
608-095-LENGTH Tubular 48 1-1/4" OD x .095 Wall
608-125-LENGTH Tubular 48 1-1/4" OD x .125 Wall
608-188-LENGTH Tubular 48 1-1/4" OD x .188 Wall
608-250-LENGTH Tubular 48 1-1/4" OD x .250 Wall
REAR SWAY BARS
PART # BAR SPLINE DESCRIPTION
607-3 Solid 36 5/8" OD
607-4 Solid 48 3/4" OD
607-5 Solid 48 7/8" OD